Water Purification Solutions
The unique water purification method enables the separation of impurities from water on a large scale without generating sludge that is difficult to dry and process. After the Flocon process, two fractions are formed from the wastewater: Purified water and floc.
Water: In the cleaning process wide range of impurities are being separated from the wastewater. Dissolved oil, heavy metals, solids and phosphorus can be practically completely separated from the water. In the reactor cell, metal ions are removed from the electrode with electricity. The metal ions form a sieve with the water's OH- groups on a molecular level. The impurities in the water are attached to this metal hydroxide network, which rises with the help of the hydrogen gas produced and leaves the top of the separation tower. Purified water is let out from the bottom.
The floc: The separated floc continues to dry by itself, without heat energy or compression, under the influence of oxygen in the air. The process does not produce sludge, which is often difficult to dispose of due to the low solids content. In this case the floc can be burned, recycled or used as a nutrient, depending on what substances the incoming water contains. The separation process is fast and does not require delay time in ponds or vessels. The cleaning result can be seen immediately and process adjustment is therefore simpler. The footprint of the process equipment is also small. We offer testing and expert services, tailored water purification equipment well as their maintenance services.